Dry silica fume powder for high-performance concrete and specialty mortars built for durability-focused infrastructure works.
WALLGRIP MICROSILICA® is a dry silica fume powder used in cementitious systems to improve the properties and performance of high-performance concrete and specialised mortar formulations.
It supports concrete performance in two ways:
This page focuses on the Densified grade (D).
Ideal for concrete applications where long-term durability and performance are critical especially infrastructure works.

High-durability concrete lining for underground transit and tunnel infrastructure.

Concrete Performance concrete for deep foundation elements requiring long-term structural integrity.

demanding impermeability and compressive strength.

Improves performance of specialty mortar systems for infrastructure applications.
Improves properties and performance of high-performance concrete and specialised mortars for durability-led structures.
Works as a particle packing improver (fills micro void behaviour) and a reactive pozzolan (performance contribution).
Helps engineers target strength, durability and impermeability objectives in durability-led structures.
Chemical & physical reference values for WALLGRIP MICROSILICA® (Densified grade).
| Parameter | Value |
|---|---|
| SiO2 | Minimum 85.0% |
| H2O (when packed) | Maximum 3.0% |
| Retained on 45 µm | Maximum 10.0% |
| Specific surface area | 15–35 m²/g |
| Bulk density (Undensified) | 200–350 kg/m³ |
| Bulk density (Densified) | 500–700 kg/m³ |
| Form | Amorphous powder; grey/off-white; odourless |
| Specific gravity | 2.2 |
| Mean particle size | ≈ 1 µm |
Always refer to the latest Product Safety Information (PSI) document for comprehensive safety, handling, and disposal guidelines before use on site.
WallGrip states sustainability is central to its strategy, with a mission to provide advanced material solutions and a commitment to reducing embodied carbon emissions.
Available in 25 kg bags, other bag sizes, and bulk road tanker supply options.
Store in dry conditions; protect from moisture. Keep away from HF. Avoid storage near or below 0°C.
Micro silica stays good for 2 years from the date of manufacture when stored in dry conditions.
TDS / MSDS / PSI available on request or as applicable for your project.
Get the right recommendation based on project need and spec alignment.
Undensified (U) has typical bulk density 200–350 kg/m³, while Densified (D) has typical bulk density 500–700 kg/m³.
It acts physically to optimise particle packing and chemically as a highly reactive pozzolan.
Store in dry conditions and protect from moisture; keep away from HF and avoid storage near or below 0°C.
Whether it’s tunnels, metro, piles, or raft foundations—our team will recommend the right grade and supply format for your infrastructure project.