For soil stabilisation & pH control. Supports ground improvement, drilling fluid treatment, and concrete system performance where site conditions demand controlled alkalinity and stability.
WG Hydrated Lime is a calcium hydroxide powder used across multiple application including construction, water treatment, and agriculture.
On infrastructure sites, it is typically selected for soil stabilisation, pH adjustment, and treatment of drilling fluids and concrete systems to support the right reaction environment.
pH Range
Applications
Formula
Infrastructure-focused applications where controlled alkalinity matters.

Soil Stabilisation & Ground Improvement
Used in ground improvement, road subgrade, embankment, and foundation works—where stabilisation and improved soil behaviour are required.

Used for pH adjustment and treatment of drilling fluids, especially when maintaining a basic reaction environment is needed for consistent performance.
Site Note
In polymer-based drilling systems, pH typically needs to be kept in the basic field WG Polymer site checks commonly target pH 9–10 during mixing/drilling and before concreting.

Concrete Systems (Reaction Environment Support)
Used in the treatment of concrete systems where controlling alkalinity and the reaction environment matters for performance.
Simple, practical benefits for infrastructure execution.
Helps in soil stabilisation and ground improvement works subgrade, embankment, and foundation use-cases.
Supports pH control for drilling fluids useful when maintaining a stable, basic reaction environment is important for system consistency.
Works well alongside bentonite/polymer mud systems to maintain required pH and performance.
Engineering-grade data for your project evaluation.
| Parameter | Value |
|---|---|
| Chemical Name | Calcium Hydroxide |
| Chemical Formula | Ca(OH)2 |
| Appearance | Fine white powder |
| Primary Use | Soil stabilization, pH adjustment, drilling fluid treatment |
| pH (Typical) | 12.4 (saturated solution) |
| Solubility In Water | Slightly soluble (~1.5 g/L at 25°C) |
| Target pH (Polymer Systems) | 9–10 (mixing/drilling), up to 10–11 as required |
| Packaging | Available in bags / bulk — per project requirement |
Practical guidance for site engineers and project teams.
In polymer-based drilling systems, maintain pH around 9–10 during mixing and before concreting. Adjust to 10–11 when required by system or site condition.
Available in bags and bulk packaging, customised to project volume and logistics requirements.
Store in a cool, dry, and covered environment. Keep away from moisture and incompatible materials.
Refer to product documentation for recommended shelf life and storage duration guidelines.
TDS / MSDS available on request for vendor registration, approvals, and submittals.
TDS & MSDS documentation ready for your compliance needs.
We help align product suitability to your specific project scope.
Direct access to our technical team for site-specific guidance.
Commonly used for soil stabilisation, pH adjustment, and treatment of drilling fluids and concrete systems—especially in subgrade, embankment and foundation works.
Yes hydrated lime is often paired with bentonite/polymer mud systems to help maintain required pH and performance.
Polymer systems commonly keep pH in the basic range, with typical checks around pH 9–10 during mixing/drilling and before concreting.
Share your project type (subgrade / piling / D-wall / ground improvement) and what you’re trying to control. Our team will guide the right recommendation and documentation.