WG DustShield is WallGrip’s specialised polymer-based dust suppression solution for construction, roads/haul roads, mining and tunnelling built to control harmful airborne dust while conserving water and improving site safety.
Traditional dust suppression using water-only spraying creates real site issues:
01
02
03
04
WG DustShield uses a two-action mechanism to control dust effectively.
01
Wetting agents quickly adsorb on dust particles and modify their wettability, reducing the contact angle for superior dust capture.
02
Binding agents trap soil particles; as water evaporates, the polymer hardens and forms a continuous matrix/film over the aggregate.
What you can expect from WG DustShield deployment.
70%
Up to 70% reduction in water consumption, and in many use-cases up to ~80% vs normal water-only dust control.
90%
Reported performance results show ~90% dust reduction in controlled reporting conditions.
5-7
One application typically controls dust for 5–7 days; case reporting also references longer surface stability.
Job site does not become slippery after application, reducing slip–trip–fall risk; significantly fewer visible dust particles.
Choose the right variant for your site environment.
Roads / Haul Roads / Trails
A highly effective option for stopping dust from roads, haul roads and trails.
Closed / Confined Atmospheres
Specialised for controlling dust in closed atmospheres such as tunnelling and blasting zones.
WG DustShield is deployed across diverse infrastructure environments.
Highways, haul roads-improves visibility and reduces hazards during construction.
Dust control in underground works and closed atmospheres (variant dependent).
Prevents erosion, migration of dust, and loss of valuable construction/mineral material.
Prevents topsoil loss and reduces dust during construction phase.
A simple 4-step process from survey to sealed surface.
Site Survey & Assessment
Measure area, assess dust/soil conditions, calculate optimal dosage.
Dilution Preparation
Mix WG DustShield in a calibrated water tanker as per specification.
Precision Spraying
Apply using calibrated/monitored spraying for uniform coverage. Digital monitoring can be used where available.
Surface Sealing & Monitoring
Observe crust formation and track performance for re-application planning.
A simple 4-step process from survey to sealed surface.
01
Measure area, assess dust/soil conditions, calculate optimal dosage.
02
Mix WG DustShield in a calibrated water tanker as per specification.
03
Apply using calibrated/monitored spraying for uniform coverage. Digital monitoring can be used where available.
04
Observe crust formation and track performance for re-application planning.
Reduces airborne particulate matter and eliminates slip hazards from excess water.
Supports smart dust control aligned with environmental compliance expectations.
Improves overall site cleanliness where dust control is critical to operations.
Available in industrial-grade containers. Contact team for bulk packaging options.
Store in a cool, dry area away from direct sunlight. Follow MSDS guidelines.
Refer to TDS for product-specific shelf life information and storage recommendations.
TDS / MSDS available on request for approvals, submittals, and HSE documentation.
Share your application requirements and site conditions to receive the right variant recommendation and application guidance.
It combines wetting agents (improves dust particle wettability) and binding agents (forms a matrix/film as water evaporates), creating a surface crust that suppresses dust.
Typical performance is 5-7 days depending on site conditions; performance tracking helps decide re-application timing.
R50 is positioned for roads/haul roads/trails, while 2022 is specialised for closed atmospheres like tunnelling and blasting.
Share your site type (road / tunnel / stockpile / embankment) and dust severity our team will recommend the right WG DustShield variant and application approach.
